Course Quiz | Industrial & Construction Safety Solutions

INDUSTRIAL & CONSTRUCTION
SAFETY TRAINING,
CONSULTING & HUMAN
RESOURCE SERVICES

   

Course Quiz

Name:
Company Name:
Email Address:
Which of the following statement(s) is/are true?
More than one person may secure a disconnect with his or her padlock.
If one person secures a disconnect with their padlock, it is not necessary for others to secure the disconnect with their padlock.
You can never use more than one padlock to secure a disconnect.
The start pushbutton should not be pushed after the safety disconnect device is locked to the off position.
True
False
No person shall be authorized to remove another person's padlock while that individual is on site.
True
False
Which of the following statement(s) is/are true?
Locks must include provisions for identification of the person who applied the lock.
Employees who have a need to lock out equipment should, for security reasons, apply their own locks.
Whenever a disconnect device is locked out, a "Locked Out" tag must also be used.
All of the Above
Locks must be individually lockable with no master key.
True
False
An employee is cleaning a floor feed unit. She switches off the disconnect but does not lock it out. Which of the following statement(s) is/are true?
The disconnect should be locked out.
The employee is fully complying with the standard by switching the disconnect off.
Locking out the disconnect is preferred, but not mandatory.
Check all that apply: Two employees are involved in cleaning a machine that has an electric and a hydraulic disconnect. Which of the following statement(s) is/are true?
Both the hydraulic and the electric disconnect must be locked out.
Only the electric disconnect must be locked out.
The hydraulic disconnect must be locked out only if the employees will be near the hydraulic ram while cleaning the machine.
Both employees must apply a lock to each disconnect.
One employee should apply a lock to the electric disconnect. The other employee should apply his or her lock to the other disconnect.
Each employee who locks equipment must affix a Locked Out tag if the lock is kept on beyond the end of the shift, except in cases where multiple locks are used on a lockout device.
True
False
Following a changeover period, when the timing of equipment must be adjusted, which of the following is/are true?
No mechanical adjustments shall be performed which require contact with moving parts.
The safety disconnect shall be switched to the off position and locked out before any adjustments are made inside the guards.
De-energizing the equipment does not apply to this situation.
At the end of a work shift, an employee who has been working on equipment is relieved by a second employee. Which of the following statement(s) is/are true?
The first employee should remove his padlock first. The second employee should then install her padlock on the lockout device.
The first employee must remove his padlock only after the second employee has installed her padlock.
Which of the following is/are examples of an energy isolation devices?
A stop push button.
An E-stop.
An electrical disconnect.
All of the Above
Equipment must be moving to be energized.
True
False